MCSM1-01X series
Special optical system: Macro lens with tilt (angle adjustment) function

3D macro lens with Scheimpflug adjustment

A macro lens with a tilt function that applies the Scheimpflug principle. As it is a non-telecentric macro lens, it has a lightweight and compact design.
Proposal of a lens that solves the out-of-focus problem that occurs during oblique imaging in visual inspection of substrates and foreign matter

Compatible with 2/3″ megapixel image sensors
Adjustable from ×0.1 to ×1 (WD=271 to 46mm)
With Shineproof function
C-mount

Drawings are available from the OptoEngineering website.

Go to the OptoEngineering website

For purchase inquiries, please call 03-5628-5116 or formfrom

※本製品はイタリアのレンズメーカー「Opto Engineering 社」の製品です。当社は日本における販売代理店です。
*Prices of Opto Engineering products are reviewed monthly due to exchange rate fluctuations.
※Opto Engineering社製品は日本国内のみの販売です。

Scheimpflug principle

The film plane and lens principal plane are mounted parallel to each other in a normal camera, and the film plane and lens principal plane never intersect. However, if the film plane and the lens principal plane are not parallel, the object planes are not parallel. At this time, the Scheimpflug principle states that the film plane, lens principal plane, and object plane intersect on the same line as shown in the left figure. Since the object plane is not parallel to the principal plane of the lens, a camera that applies the Scheimpflug principle can focus both near and far objects at the same time.

Comparison with normal lens

An image projected obliquely with a normal macro lens (out of focus occurs)

An image projected obliquely by the macro lens MCSM with a tilt function (the whole screen is in focus)

Visual field relationship diagram

Optical system specifications

Model	Optical system specifications
	F value	ワーク傾斜角度	マウント傾斜角度	WD
		(degree)	(degree)	(mm)
MCSM1-01X	–	0.0 to 45.0	0.0 to 18.3	46.0 to 271.0
1.0X	6.3 (12.5)	0.0	0.0	46.0
		5.0	5.0
		10.0	10.0
		15.0	15.0
0.75X	6.2 (10.9)	0.0	0.0	47.8
		7.5	5.7
		15.0	11.4
		20.0	15.3
0.5X	6.3 (9.4)	0.0	0.0	59.6
		10.0	5.0
		20.0	10.4
		30.0	16.1
0.33X	6.2 (8.3)	0.0	0.0	83.8
		15.0	5.1
		30.0	10.8
		45.0	18.3
0.2X	6.3 (7.5)	0.0	0.0	135.3
		15.0	3.0
		30.0	6.7
		45.0	11.4
0.1X	6.3 (6.9)	0.0	0.0	271.0
		15.0	1.6
		30.0	3.4
		45.0	5.8

※（）内数値は有効Fﾅﾝﾊﾞｰ

camera field of view

Model	camera field of view
	2/3″ (6.6×8.8)	1/2″ (4.8×6.4)	1/3″ (3.6×4.8)
	Height x Length A (Length B) (mm)
MCSM1-01X	–	–	–
1.0X	6.6 x 8.8 (8.8)	4.8 x 6.4 (6.4)	3.6 x 4.8 (4.8)
	6.6 x 8.7 (8.9)	4.8 x 6.3 (6.5)	3.6 x 4.8 (4.8)
	6.6 x 8.6 (9.0)	4.8 x 6.3 (6.5)	3.6 x 4.7 (4.9)
	6.6 x 8.5 (9.1)	4.8 x 6.2 (6.6)	3.6 x 4.6 (5.0)
0.75X	8.8 x 11.8 (11.8)	6.4 x 8.6 (8.6)	4.8 x 6.4 (6.4)
	8.9 x 11.6 (12.0)	6.5 x 8.4 (8.7)	4.8 x 6.3 (6.5)
	9.0 x 11.4 (12.2)	6.5 x 8.3 (8.8)	4.9 x 6.2 (6.6)
	9.1 x 11.3 (12.3)	6.6 x 8.2 (8.9)	5.0 x 6.2 (6.7)
0.5X	13.3 x 17.7 (17.7)	9.6 x 12.8 (12.8)	7.2 x 9.6 (9.6)
	13.4 x 18.0 (17.3)	9.7 x 12.6 (13.1)	7.3 x 9.4 (9.8)
	13.9 x 17.0 (18.4)	10.1 x 12.3 (13.4)	7.6 x 9.2 (10.1)
	14.8 x 16.6 (18.9)	10.7 x 12.1 (13.7)	8.0 x 9.0 (10.3)
0.33X	20.1 x 26.7 (26.7)	14.6 x 19.4 (19.4)	10.9 x 14.6 (14.6)
	20.7 x 25.9 (27.4)	15.1 x 18.9 (19.9)	11.3 x 14.1 (14.9)
	22.8 x 25.1 (28.6)	16.6 x 18.2 (20.8)	12.5 x 13.7 (15.6)
	27.3 x 24.1 (30.1)	19.8 x 17.5 (21.9)	14.9 x 13.1 (16.4)
0.2X	33.0 x 44.0 (44.0)	24.0 x 32.0 (32.0)	18.0 x 24.0 (24.0)
	34.2 x 42.7 (45.4)	24.8 x 31.0 (33.0)	18.6 x 23.3 (24.8)
	38.0 x 41.2 (47.2)	27.7 x 30.0 (34.3)	20.7 x 22.5 (25.7)
	46.4 x 39.5 (49.7)	33.7 x 28.7 (36.2)	25.3 x 21.5 (27.1)
0.1X	65.5 x 87.3 (87.3)	47.6 x 63.5 (63.5)	35.7 x 47.6 (47.6)
	67.9 x 84.7 (90.2)	49.4 x 61.6 (65.6)	37.0 x 46.2 (49.2)
	75.8 x 81.8 (93.7)	55.2 x 59.5 (68.1)	41.4 x 44.6 (51.1)
	93.4 x 78.2 (98.9)	68.0 x 56.9 (71.9)	51.0 x 42.7 (53.9)

※カメラ視野については一例になります。

Appearance specifications

Model	Appearance specifications
	Length (including mount)	weight	mount
	(mm)	(g)
MCSM1-01×	50.8	164	C.